23cm Power amplifier Module generating 20W of output with an input of 50mW making it ideal for use with our 23cm TX.
PCB incorporates a bias control to adjust the output power
Built Tested Module Ready to install in an enclosure of your choice
Heatsink and Fan included
with a 13.8V supply the amplifier is capable of about 30W, however this exceeds the recommended "safe" output power (refer to data sheet).
With an input of 50mW as per our 23cm TX the bias may be adjusted for an output of between 1 and 20W (refer to datasheet for operation beyond 20W).
18W output (recommended but 30W possible) for 50mW input
Possible to use for SSB, gives approx 18W linear output
Frequency 1240 - 1300MHz
Drive direct from our 23cm TX
13.8V operation @ 7.5A typical
+ and - PTT
Reverse polarity protection
Adjustable output power (1 to 30W) See data sheet
Small size, possible to fit in 80 x 80 x 80mm cube including heatsink!
Device is Mitsubishi RA18H1213G - see data sheet for full ratings etc.
Product Code: 2318PA